Radix epsilon Manual de instrucciones descargar pdf (Pagina 20)

Setting Up and Programming the Digital Receiver

Page 20 Version 1.0

The displayed data concerns the revision of the decoder firmware current at the

time the receiver was manufactured, which might be of value if the receiver should

ever require servicing.

• Press the EXIT-key to exit the “Decoder Status“ menu.

7.5 Automatic Channel Preselection

7.5.1 Selecting the Satellite to be Used

NOTE:

Four satellites have been factory preprogrammed. Contact your dealer or a

television repair shop specializing in satellite-television systems if you would like to

have further satellites programmed.

• Use the p and q keys to highlight the “Installation“ field.

• Press the MENU-key.

• Use the p and q keys to highlight the “Satellite“ field.

• Press the MENU-key and then use the p and q keys to select one of the

following satellites: ASTRA/EUTELSAT 13°/ASIASAT2/PANAMASAT2.

• Press the MENU-key to confirm your choice.

You may now preselect the desired channels for the particular

satellite that you have selected.

MENU/EXIT

Einstellungen

Satellit

Installation

1 - 3

Signal Stärke

DiSEqC/22KHz Autom. Suchlauf

LNB Lokal-Freq Manueller Suchlauf

Satellit ASTRA DiSEqC AUS

LNB Lokal 10600MHz 22KHz EIN

MENU/EXIT

Setup Value

Satellite

Installation

1 - 3 - 1

Signal Strength

DiSEqC/22KHz Auto Search

LNB Lokal-Freq Manual Dearch

ASIASAT2

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 34 35

Sin comentarios

Radix epsilon Manual de instrucciones Pagina 20